Slide the parts together with a twisting motion to spread the adhesive evenly. Do not "pump" the parts in and out—this introduces air bubbles.
When a shaft wears down or a bearing housing becomes ovalized, the traditional solution is often expensive: welding, machining, or replacing the entire assembly. But there is a third path—one that lives inside a small bottle. Enter . lokfix p80
For passive metals (stainless steel, zinc, anodized aluminum) or large gaps (>0.3mm), use an activator like Loctite 7471 or 7649. This speeds up cure time from 24 hours to 30 minutes. Slide the parts together with a twisting motion